Facts On Volkswagen Radio CodeOn March 27, 2019 by Atkoset
All Volkswagen automobile radios are equipped with an anti-theft feature that displays”safe code.” Like many automotive security systems, this attribute can accidentally be activated. Thankfully, it’s easy to unlock a Volkswagen radio that’s reading”safe code.” The safe code security feature is supposed to discourage thieves from stealing radios from Volkswagen models by locking the radios. Once the feature is activated, a radio will turn on but it will only display”safe code.” Until the appropriate code is entered, the user can’t listen to a radio station, play a CD, connect an MP3 player or even turn on the quantity. The radio is effectively rendered useless. The security feature is triggered if the radio loses power. So as to steal a radio out of a car, a thief must disconnect the radio in the car’s battery and the radio will lose power. Even if the thief is quick and immediately connects the radio to a different power supply, there’ll be a moment when it is not connected to any power source. Go to the below mentioned site, if you are searching for additional information regarding vw radio codes.
Thus, an interruption in the power supply indicates a potential burglary. A burglary, however, is not the only way a radio might get rid of power. If a car’s battery is damaged or replaced, there’ll be at least a short time when the radio does not have electricity. This break in electricity will trigger the safe code safety feature because radio doesn’t have any way of knowing whether there is a burglary in progress or a car’s battery has been removed. If your Volkswagen radio reads”safe code,” you won’t have the ability to use it until you enter its safe code. The safe code is a four-digit number, which you need to know to unlock the radio. There are a few places where you might find your Volkswagen radio’s safe code. It is included with your Volkswagen’s original paperwork, in the radio manual. If you do not have this record, you might find the code in the trunk or on the spare tire. Often when a driver brings a Volkswagen to a dealership for this matter, the trader will affix a tag with the code into the lid of the trunk or on the spare tire.
If you can not find the code, you’ll need to get a dealer look it up. Any Volkswagen dealer can look up the code, by looking up your car’s VIN or pulling the radio out and checking its serial number. Once you’ve got the code, it’s easy to enter. All the first four preset buttons corresponds to one of the digits in the code. In other words, the first preset is used to input the first digit, the second preset the second digit, and so on. Pressing a preset will increase the corresponding amount by one, with”9″ going back to”0.” If you have more than four presets, just the first four are used. It is possible to use the seek buttons to go back and forth between the digits. If you see”two Safe Code,” then the wrong safe code was entered twice. You will want to wait an hour before you can input the code again. After the proper code is entered, your radio will be unlocked and fully functional. If your Volkswagen radio is showing”safe code,” and you don’t know the code, then come to Fox Valley Volkswagen.